Stopping, Restarting Plotting Of Own Ship Track - Furuno GP-3500 Operator's Manual

3.2

Stopping, Restarting Plotting of Own Ship Track

When your boat is at anchor or returning to port, you probably won't need to
record its track. You can stop recording the track, to conserve the track memory,
as follows.
1. Press the [PLOT INTVL] key several times to show the "H" (Hold) icon (at the
bottom of the screen). Each time the key is pressed the track function
available changes in the sequence shown below.
TRACK INTERVAL 1 -> TRACK INTERVAL 2 -> HOLD -> TRACK INTERVAL 1
Track plotting interval or "HOLD" appears at the top right corner of the NAV INFO
1 (or 2) display. When plotting is stopped, own ship's mark changes from a solid
circle to a hollow one and track is not stored in the memory.
Own ship's mark
Note: If the track plotting interval is not shown in the NAV INFO window, see
2. To restart plotting, press the [PLOT INTVL] key.
Note: Plotting can also be stopped or restarted from the full screen echo
sounder display.
34 44.1447'N
135 21.0758'E 350.2
20
GPS2D
Stopping plotting track (ex. PLOTTER NAV INFO 1 display)
paragraph 9.6.2.
TRKS HOLD
9.9
kt
2003. 1. 1
00:01
T
FISH
43
21 22
000001
42
41
0.3nm
H
WGS84
3. TRACKS
Current interval
or "TRKS HOLD"
HOLD icon
3-5