Specifications - Furuno GP-3500 Operator's Manual

FURUNO
SPECIFICATIONS OF COLOR GPS PLOTTER
1 DISPLAY
1.1 Display system
1.2 Effective area
1.3 Display pixels
1.4 Position indication
1.5 Projection
1.6 Usable area
1.7 Display mode
2 GPS RECEIVER
2.1 Receiving channels
2.2 Rx frequency
2.3 Rx code
2.4 Position fixing system
2.5 Position accuracy
2.6 Tracking velocity
2.7 Position-fixing time
2.8 Position update interval 1 s
3 PLOTTER
3.1 Effective projection area 0.125 nm to 6,144 nm (at equatorial area)
3.2 Track display
3.3 Memory capacity
Track and mark point:
Waypoint:
Route:
3.4 Alarms
3.5 Electronic chart card
3.6 Information display
GP-3500
10.4-inch TFT color LCD
158.4 (W) x 211.2 (H) mm
480 (H) x 640 (V) dots
Latitude/longitude or Loran C or A LOPS
Mercator
85° latitude or below
Plotter, Video pilot, NAV data
GPS: 12 channels, 12 satellite, parallel tracking
WAAS: 1 channel
1575.42 MHz
C/A code, WAAS
All in view, 8-state Kalman filter
GPS: 10 m approx., 95% of the time, 2 drms, HDOP≦4
WAAS: 3m approx., 95% of the time, 2 drms
999 kt
Warm start: 12 s, Cold start: 90 s
Plot interval: by time (1s to 99m 59s) or distance (0.01 to 9.99 nm)
16,000 points
3,500 points with comment (QP 35 points)
200 routes and 1 simple route with 35 waypoints each
Arrival and Anchor watch alarms
Cross track error and border alarms
Ship's speed in and out alarms
FURUNO chart card or NAVIONICS chart card available
Ship's L/L position (Loran C/A or Decca TDs also available)
Date and Time, Ship's speed, Chart scale, Waypoint L/L position,
Range and bearing to destination waypoint,
Cursor intersection L/L position,
SP - 1
GP-3500
E4421S01C