Audio Alarm On/Off - Furuno GP-3500 Operator's Manual

8. ALARMS
8.1

Audio Alarm On/Off

The audio alarm sounds whenever an alarm setting is violated. You can enable
or disable the audio alarm as follows:
1. Press the [MENU] key to show the main menu.
2. Press the [6] key to show the ALARMS SETUP menu.
3. Rotate the [ENTER] knob to select AUDIO ALARM.
4. Roll the trackball in left-right direction to select an beep type
SHORT:
LONG:
CONT:
OFF:
5. Press the [MENU] key several times to close the menu.
8-2
6. ALARMS SETUP
AUDIO ALARM
ARRIVAL/ANCHOR WATCH
RANGE TO MONITOR 0.001 nm
XTE/BORDER ALARM 1. XTE
RANGE TO MONITOR 0.050nm
PROXIMITY ALARM
SPEED ALARM
MINIMUM SPEED
MAXIMUM SPEED
TRIP LOG ALARM
DIST TO MONITOR
TEMPERATURE ALARM
MINIMUM TEMPERATURE
MAXIMUM TEMPERATURE
SHEAR ALARM
GRADIENT OF TEMP 00.1 C
INTERVAL
BOTTOM ALARM
DEPTH
RANGE
TURN KNOB TO SELECT MENU.
SELECT THE ITEM OF EACH MENU BY TRACKBALL.
Alarm setup menu
Short beeps sound.
Long beeps sound.
Continuous beep sounds.
Audio alarm off.
1. SHORT 2. LONG 3. CONT 4. OFF
1. ARRIVAL 2. ANCHOR
2. BORD 3.OFF
1. ON 2. OFF
1. INSIDE 2. OUT
000.0kt
030.0kt
1. ON 2. OFF
0000.1nm
1. INSIDE 2. OUT
+00.0 C
+30.0 C
1. ON 2. OFF
0.1 10.0
010 s 10 120 s
1. ON 2. OFF
0000.0ft
00.0ft
3. OFF
3. OFF
3. OFF