3.3.4
Automatically changing own ship's track color by water
temperature
There are two methods by which own ship's track color may be changed
according to water temperature: by preset temperature range or temperature
variation.
Changing own ship's track color by preset temperature range
This method changes the color of track when the water temperature is within a
preset range. For example, you can set up to paint the track yellow when the
water temperature is between 17 and 20°C.
1. Press the [MENU] key to show the main menu.
2. Press the [4] key to show the MARKS/SHIP'S TRACKS SETUP menu.
3. If PAGE 2/2 appears, rotate the [ENTER] knob to select PREVIOUS PAGE.
4. MARKS/SHIP'S TRACKS SETUP
NEXT PAGE
MARKS SIZE
LINES STYLE
TRACK INTERVAL 1
TRACK INTERVAL 2
SHIP'S TRACKS DISP
DISP TRACKS (HOLD) 1. ON
PLOT TRACKS (HOLD) 1. ON
TRACKS COLOR
TRACKS BY TEMP
WHITE:
BLUE:
PURPLE
LIGHT BLUE: 012.5˚F ~
GREEN:
YELLOW:
RED:
TRACKS BY DEPTH
WHITE:
BLUE:
PURPLE
GREEN:
YELLOW:
RED:
SHIP'S TRACKS
12,000
MARKS
04,000/16,000
TURN KNOB TO SELECT MENU.
SELECT THE ITEM OF EACH MENU BY TRACKBALL.
Marks/ship's tracks setup menu (Page 1/1)
PAGE 1/2
1. L
2. L+
1.
2.
3.
TIME (00M10s)
DIST (0.10nm)
TIME (00M10s)
DIST (0.10nm)
1. ON
2. OFF
2. OFF
2. OFF
1.
2.
3.
RANGE
GRDNT (0.2˚F
005.0˚F BELOW
005.0˚F ~
010.0˚F ~
015.0˚F ~
017.5˚F ~
020.0˚F ABOVE
RANGE
GRDNT (2ft 20ft 200ft)
0032.8 ft SHALLOWER
0032.8 ft ~
0164.0 ft ~
0656.2 ft ~
0984.3 ft ~
1312.3 ft DEEPER
3. TRACKS
3. S
4.
4.
2.0˚F)
3-9