Internal Memory; Saving Data To Internal Memory - Furuno GP-3500 Operator's Manual

10.4

Internal Memory

Your unit has five internal memories in which to store data. Data are saved and
replayed between the working memory and internal memory.
10.4.1

Saving data to internal memory

Data in the working memory can be saved in internal memories. The total
number of points for tracks, marks and lines is 16,000.
1. Press the [MENU] key to show the main menu.
2. Press the [3] key to show the MEMEMORY CARD IOERATIONS & DATA
TRANSFER menu.
3. Press the [8] key to show the OPERATE INTERNAL MEMORY.
4. Rotate the [ENTER] knob to select item to save.
5. Press the [1] key to select "1. YES."
6. Repeat steps 4 and 5 to save other items.
7. Rotate the [ENTER] knob to select BLOCK 1, 2, 3, 4 or 5 as appropriate.
BLOCK-1, 2: For track, mark, waypoint, route and setting data
BLOCK 3, 4, 5: For track and mark only
Note: If BLOCK-1 or 2 is used for backup (see paragraph 10.3.2), it cannot be
selected here.
3-8. OPERATE INTERNAL MEMORY
1. YES
SHIP'S TRACKS & MARKS
1. YES
WAYPOINTS & ROUTES
SETTING DATA 1. YES
SAVE TO INTERNAL MEMORY
BLOCK-1 1. YES
BLOCK-2 1. YES
BLOCK-3 1. YES
BLOCK-4 1. YES
BLOCK-5 1. YES
PLAYBACK FROM INTERNAL MEMORY
BLOCK-1 1. YES
BLOCK-2 1. YES
BLOCK-3 1. YES
BLOCK-4 1. YES
BLOCK-5 1. YES
TURN KNOB TO SELECT MENU. SELECT THE ITEM OF EACH MENU BY
TRACKBALL. NOTE: TRACKS & MARKS ONLY CAN BE SAVED IN THE
BLOCK 3-5. WAYPOINTS & ROUTES CAN BE SAVED IN THE BLOCK.
Operate internal memory
10. RECORDING & PLAYING BACK DATA
2. NO
2. NO
2. NO
2. NO
2. NO
2. NO
2. NO
2. NO
2. NO
2. NO
2. NO
2. NO
2. NO
10-11