Displaying Data From A Memory Card - Furuno GP-3500 Operator's Manual

10. RECORDING & PLAYING BACK DATA
10. Press the [ENTER] knob.
The overwriting starts.
The message "NOW SAVING DATA TO MEMORY CARD. DO NOT TURN OFF
DISPLAY UNIT UNTIL COMPLETED." appears. When the overwriting is finished,
the message "COMPLETED SAVING DATA. PRESS KNOB TO CONTINUE."
appears.
11. After the "completed" message appears, press the [ENTER] knob.
12. Press the [MENU] key several times to close the menu.
10.2.3

Displaying data from a memory card

Tracks and marks in a memory card can be displayed on the screen as follows.
1. Insert a memory card into the left slot.
2. Press the [MENU] key to show the main menu.
3. Press the [3] key to show the MEMORY CARD OPERATIONS & DATA
TRANSFER menu.
4. Press the [3] key to show the DISPLAY DATA FROM MEMORY CARD menu.
Note: If an empty memory card is inserted, a beep sounds at step 4
5. Rotate the [ENTER] knob to select a file to load.
6. Press the [ENTER] knob to show "YES" at the DISPLAY column.
7. Repeat steps 5 and 6 to load other files.
Note: To escape, press the [ENTER] knob to select "NO."
8. Press the [MENU] key several times to close the menu.
Tracks and marks are displayed on the screen. These data can not be edited or
erased.
10-6
3-3. DISPLAY DATA FROM MEMORY CARD
FILE NAME
FILE 1
FILE 2
TURN KNOB TO SELECT FILE.
PRESS KNOB TO DISPLAY DATA.
Display data from memory card
operation.
TRACKS MARKS DISPLAY
120 20 NO
916 0 NO