Alarms - Furuno GP-3500 Operator's Manual

8.

ALARMS

There are 10 alarms which generate both audible and visual alarms: Arrival
alarm, Anchor Watch Alarm, XTE Alarm, Border Alarm, Proximity Alarm, Speed
Alarm, Trip Log Alarm, Temperature Alarm, Shear Alarm, Bottom Alarm.
When an alarm setting is violated, the buzzer sounds and the speaker icon
( )and type of alarm appear. You may silence the buzzer by pressing the
[CLEAR] key. The icon remains on the screen until the cause of the alarm is
removed or the alarm is deactivated. When an alarm setting is occurred again,
the buzzer sounds and the speaker icon appears.
Note: When multiple alarms are violated, the last-violated alarm is shown at the
bottom of the screen.
ARRIVAL WGS84
Status abbreviation and alarm type appears alternately.
ARRIVAL: Arrival alarm
ANCHOR: Anchor watch alarm
XTE: XTE alarm
BORDER: Border alarm
PRXMTY: Proximity alarm
SPEED: Speed alarm
TRIP: Trip log alarm
TMP: Temperature alarm
SHEAR: Shear alarm
BOTTOM: Bottom alarm
Plotter display, showing location of violated alarm indication
42
41
0.3nm
Alarm icon
8-1