Mini Chart Cards - Furuno GP-3500 Operator's Manual

2. PLOTTER AND PILOT DISPLAY DESCRIPTION
4. When it is not necessary to change the VRM's location and size, simply
press the [ENTER] knob.
VRM is fixed at the selected position.
5. To turn off the VRM, press the [VRM] key to hide VRM.
The data box disappears immediately.
Note: The [VRM] key's default function is to turn the VRM on and off. Its function
can be changed as desired. For details, see paragraph 9.5.1.
2.7

Mini Chart Cards

This equipment uses both FURUNO and NAVIONICS chart cards or C-MAP NT
mini chart cards depending on its specifications. When you insert a suitable
chart card in the right side slot and turn on the power, a chart appears. If a
wrong card is inserted or a wrong chart scale is selected, landmasses will be
hollow. Insert the proper card and select a suitable chart scale. Chart icons
appear at the bottom of the plotter (or pilot) display to help you select a suitable
chart size. The table below shows the chart icons and their meanings.
2-12
Chart icons and their meanings
Icon
Proper card is not inserted or
chart scale is too small.
Operate the [ZOOM IN] key to
adjust chart scale.
Chart scale is too large.
Operate the [ZOOM OUT] key to
adjust chart scale.
Suitable chart scale is selected.
Meaning