Furuno GP-330B Operator's Manual
  1. Manuals
  2. Brands
  3. Furuno Manuals
  4. GPS
  5. GP-330B
  6. Operator's manual

Furuno GP-330B Operator's Manual

Futuno gps receiver operator's manual
Hide thumbs Also See for GP-330B:
Table of Contents

Advertisement

Quick Links

See also: Operator's Manual
OPERATOR'S MANUAL
GPS RECEIVER
GP-330B
MODEL
www.furuno.co.jp

Advertisement

Table of Contents
loading

Related Manuals for Furuno GP-330B

Summary of Contents for Furuno GP-330B

  • Page 1 OPERATOR'S MANUAL GPS RECEIVER GP-330B MODEL www.furuno.co.jp...

  • Page 2: Important Notices

    • Store this manual in a convenient place for future reference. • FURUNO will assume no responsibility for the damage caused by improper use or modification of the equipment (including software) by an unauthorized agent or a third party.

  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS The operator of this equipment must read these safety instructions before attempting to operate the equipment. WARNING CAUTION Warning, Caution WARNING The input voltage must be 12 VDC. Any other input voltage will damage the equipment. Always wear safety goggles and a dust mask when installing to avoid personal injury.

  • Page 4: Table Of Contents

    TABLE OF CONTENTS FOREWORD ... iv SYSTEM CONFIGURATION ... v 1. INSTALLATION ... 1 1.1 Equipment Lists ...1 1.2 Tools & Materials ...1 1.3 Choosing the Mounting Location ...2 1.4 Mounting ...3 1.4.1 Pole/Rail (Pipe) Mount ...3 1.4.2 Deck Mount ...4 1.4.3 Flush Mount...5 2.

  • Page 5: Foreword

    Thank you for considering and purchasing FURUNO equipment. Features The GP-330B is a high performance GPS Receiver designed for any type of ves- sel. This compact and cost-effective receiver offers extremely accurate position fix- es, within 3 meters with the WAAS mode activated.

  • Page 6: System Configuration

    SYSTEM CONFIGURATION : Standard supply : Optional supply : Local supply GP-330B NavNet 3D Series NMEA 2000 FI-50 Series Instruments NMEA 0183 Autopilot Current Indicator ECDIS Remote Display Unit NavNet vx2 Series Radar Scanning Sonar Video Plotter...

  • Page 7: Installation

    1. INSTALLATION 1.1 Equipment Lists Name Type Standard Supply GP-330B Receiver Installation CP20-03200 000-012-581 Materials CP20-03210 000-012-582 Optional Supply Cable Assy. 22-1025-02 000-168-883-10 Cable Assy. 22-1025-06 000-168-884-10 Cable Assy. 22-910-03 Cable Assy. MJ-A7SPF/ SRMD-100 Flush Mount Deck Mount 1.2 Tools & Materials •...

  • Page 8: Choosing The Mounting Location

    It can be mounted on a pole, rail, or flat surface. Choose a location that bal- ances the requirements below. • The GPS receiver must have a clear view of the sky to the horizon in all direc- tions. Note that frozen water spray may degrade reception.

  • Page 9: Mounting

    2. Remove the label from the GPS receiver’s socket (underside of receiver). The label may be discarded. Fasten the mount base (part C) to the GPS receiver (part A) with the supplied two panhead screws, flat washers and spring washers. The torque for the screws is 1.35 N m.

  • Page 10: Deck Mount

    Plug the cable firmly into the GPS receiver. 6. With the alignment tab on the GPS receiver facing forward, slide the captive nut upward and screw it onto the mount base. Hand-tighten only. Do not over tighten.

  • Page 11: Flush Mount

    5. Plug the cable firmly into the GPS receiver. 6. Orient the gasket with the arrow facing in the same direction as the alignment tab on the GPS receiver. Push the gasket onto the studs and slide it over the connector.

  • Page 12: Wiring, Settings

    The LEN (Load Equivalency Number) for this equipment is 3. 2.1.1 Direct Connection Insert the contact pin (supplied) into the #5 socket of the GPS Receiver connector to activate the termination resistor. (See page 8 for location of #5 socket.) Route the cable assembly to the NMEA 2000®...

  • Page 13: Network Connection

    “light” type. Attach a terminator at the ends of the backbone cable. Only two termination resistors are required on an NMEA 2000 More than two will degrade performance. * Recommended type: LTWSS-050505-FMF-TS001 (LTW Technology, Inc.), or equivalent GP-330B Termination Resistor: OFF Cable Assembly 22-1025-02 (6 m)

  • Page 14: Routing And Connecting The Cable Assembly

    Connect the GPS Receiver at the last node in the network. Insert the contact pin (supplied) into the #5 socket of the GPS Receiver connector to activate the termi- nation resistor. 2.1.3 Routing and Connecting the Cable Assembly Route the cable assembly to the NMEA 2000 cable and secure it with a cable tie to prevent damage.

  • Page 15: Nmea 0183 Connection

    Bind tape ends with suitable cable ties. Wiring procedure Route the cable assembly to the display. Coil any excess cable and secure it with a cable tie to prevent damage. Connect the GPS Receiver to your NMEA 0183 display. Remote Display...

  • Page 16: Settings For Navnet Vx2

    2.3 Settings for NavNet vx2 The following items in the NavNet vx2 menu system are applicable to the GP-330B. For details and operating procedure, see the Installation Manual for your NavNet vx2 model. NAV SETUP menu Set POSITION SOURCE to GPS or ALL.

  • Page 17: Maintenance, Troubleshooting

    Further, there are no user-serviceable parts inside. 3.1 Maintenance The GP-330B is virtually maintenance free. However, it is recommended to wipe it with a water-moistened cloth periodically to remove accumulated dirt and water de- posits. 3.2 Troubleshooting If position is not found within a reasonable amount of time, check the following items.

  • Page 18: Technical Information

    Set Query Power On Self Test function $PAMTC,QPS Query part number and serial number versions $PAMTC,QV Query GPS hardware and firmware versions $PAMTC,RESET Reset the GP-330B $PAMTC,SIM Enable/disable Simulate Mode $PAMTX Pause or resume all automatic transmission of messages $PFEC,pireq...

  • Page 19: Nmea 2000

    ® 4.2 NMEA 2000 Transmitted NMEA 2000 PGN 059392 ISO Acknowledgment PGN 060928 ISO Address Claim PGN 065285 Proprietary: Boot State Acknowledgment PGN 065287 Proprietary: Access Level PGN 126208 Acknowledge Group Function PGN 126464 PGN List - Transmit/Received PGN's Group PGN 126720 Addressable Multi-Frame Proprietary PGN 126992...

  • Page 20: Specifications

    95% at 40°C Degree of protection Bearing vibration IEC 60945 UNIT COLOR GP-330B C/A code, WAAS GPS: 12 channels parallel, 12 satellites; WAAS: 2 channels All in view, 8-state Kalman filter WAAS: 3m approx. (2drms) 60 s typical (cold start) 127258, 129025/026/029/033/044/538/539/540, 130822/823/944 12 VDC: 175 mA max.
  • Page 23 18/Mar/08 R.Esumi...
  • Page 24 18/Mar/08 R.Esumi...
  • Page 25 18/Mar/08 R.Esumi...

  • Page 26: Interconnection Diagram

    22-1025-06,10m,φ6(*1 *4) Micro-C 22-1025-02,6m,φ6 SHIELD NET-S NET-C NET-H NET-L ドロップケーブル接続 DROP CABLE CONNECTION T-コネクタ 6/10m バックボーンケーブル接続 T-CONNECTOR BACKBONE CABLE CONNECTION TITLE GP-330B 名称 GPS受信機 相互結線図 NAME GPS RECEIVER INTERCONNECTION DIAGRAM GPS受信機 GPS RECEIVER GP-330B TD-A TD-B RD-H RD-C SHIELD NET-H NET-L 最大４本まで使用可能...

  • Page 27: Declaration Of Conformity

    ----------------------------------------------------------------------------------------------------------------------------------------------- *: GP-330B is supplied by AIRMAR technology Corporation on an OEM basis and is mechanically and electronically identical to their G2183. is in conformity with the essential requirements as described in Article 10.3 and Annex II of the Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment (R&TTE Directive) and satisfies all the technical regulations...
  • Page 28 9-52 Ashihara-cho, Nishinomiya, 662-8580, JAPAN Telephone : +81-(0)798-65-2111 : +81-(0)798-65-4200 Printed in USA All rights reserved. Pub. No. OME-44520-A (DAMI ) GP-330B The paper used in this manual is elemental chlorine free. ・FURUNO Authorized Distributor/Dealer A : MAR *00016889610* *00016889610*...

Table of Contents