Furuno GP-3500 Operator's Manual page 114

9. CUSTOMIZING YOUR UNIT
4. Press the [1] key to select "1. YES."
The plotter screen appears with the following window.
5. Press the [1] key to select "1. CURSOR", "2. LAT/LON" or "3. DELTA L/L."
6. Do one of the following depending on the choice of step 5.
1. CURSOR
The position offset window changes as below.
a) Operate the trackball to place the cursor where to offset chart position.
b) Press the [ENTER] knob to return to the CHART SETUP menu.
2. LAT/LON
The position offset window changes as below.
a) Press the numeric keys to enter the latitude for own ship's position on the
chart.
b) Press the [CURSOR ON/OFF] key to switch from North to South and vice
versa.
c) Roll the trackball to downward to place the cursor on the LONGITUDE line.
d) Press the numeric keys to enter the longitude.
e) Press the [CURSOR ON/OFF] key to switch from East to West and vice
versa.
f) Press the [ENTER] knob to return to the CHART SETUP menu.
9-2
1. CURSOR 2. LAT/LON 3. DELTA L/L 4. CANCEL
OFFSET METHOD
TURN KNOB TO SELECT OFFSET METHOD.
PRESS KNOB TO CANCEL CHART POSITION OFFSET.
Position offset window
1. CURSOR 2. LAT/LON 3. DELTA L/L 4. CANCEL
OFFSET METHOD
TURN KNOB TO SELECT OFFSET METHOD.
PLACE CURSOR ON CORRECT LAT/LON POSITION AND PRESS
KNOB TO ENTER.
Position offset window (1. Cursor)
1. CURSOR 2. LAT/LON 3. DELTA L/L 4. CANCEL
OFFSET METHOD
LATITUDE
LONGITUDE
TURN KNOB TO SELECT OFFSET METHOD.
ENTER CORRECT LAT/LON POSITION AND PRESS KNOB TO ENTER.
CURSOR ON/OFF: SWITCH NOUTH/SOUTH & EAST/WEST
Position offset window (2. LAT/LON)
00 00.000' N
000 00.000' E