Using Prog Key - Furuno GP-3500 Operator's Manual

1. BASIC OPERATION
Note: The MOB mark can be deleted as follows.
ARE YOU SURE?
YES ... PRESS KNOB
NO ... PRESS CLEAR KEY
When MOB is not set as destination
1.7

Using PROG Key

The [PROG 1] through [PROG 4] keys provide for instant display of a
user-programmed options window (screen). Note that, the function for [VRM] key
can also be. The default program of the [PROG] keys are as shown in the table
below.
•Note 1: To program plotter functions to the [PROG] keys or [VRM] keys, see
paragraph 9.5.1.
1-12
Press the [CURSOR ON/OFF] key to show the cursor.
Operate the trackball to place the cursor on the MOB mark.
Press the [CLEAR] key.
The following message will appear is on the screen:
ARE YOU SURE?
YES ... PRESS KNOB
NO ... PRESS CLEAR KEY
Confirmation message
Press the [ENTER] knob.
Then, the waypoint entered at step 1 on the previous page is erased.
Operate the trackball to place the cursor on the MOB mark.
Press the [CLEAR] key.
A new message will appear on the screen:
WAYPOINT NAME (MOB)
WILL BE DELETED.
Confirmation message
Press the [ENTER] knob to erase the MOB mark.
Key
PROG 1 Displays the WAYPOINT LIST.
PROG 2 Displays DELETE SHIP'S TRACKS window.
PROG 3 Each press changes the line style.
PROG 4 Reset the trip distance to zero.
WAYPOINT NAME XXXXXX
WILL BE DELETED.
THIS WAYPOINT (MOB)
IS USED FOR NAVIGATION.
ILL IT BE DELETED?
YES ... PRESS KNOB
NO ... PRESS CLEAR KEY
When MOB is set as destination
Functions