Furuno GP-3500 Operator's Manual page 143

0-4-2. NAVIGATION DATA WINDOW SETUP
NEXT PAGE
OWN SHIP POSITION LAT/LON
OWN SHIP POSITION TD LORAN-A
OWN SHIP POSITION TD LORAN-C
OWN SHIP POSITION TD DECCA
CURSOR POSITION LAT/LON
CURSOR POSITION TD LORAN-A
CURSOR POSITION TD LORAN-C
CURSOR POSITION TD DECCA
OWN SHIP/CURSOR POSITION LAT/LON
OWN SHIP/CURSOR POSITION TD LORAN-A
OWN SHIP/CURSOR POSITION TD LORAN-C
OWN SHIP/CURSOR POSITION TD DECCA
WAYPOINT POSITION LAT/LON
WAYPOINT POSITION TD LORAN-A
WAYPOINT POSITION TD LORAN-C
WAYPOINT POSITION TD DECCA
WAYPOINT POSITION ETA & TTG
WAYPOINT POSITION ETA & TTG
SHIP/CURSOR POSITION
LAT/LON
SELECT THE POSITION TO BE DISPLAYED BY TRACKBALL.
TURN KNOB TO SELECT NAV DATA AND PRESS KNOB TO ENTER.
ZOOM IN: PREVIOUS PAGE
7. Operate the trackball to select a location.
The selected column becomes red.
8. Rotate the [ENTER] knob to select the data to display.
The navigation data window setup menu has three pages, changed by pressing
the [ZOOM IN] or [ZOOM OUT] keys. Depending on the column size, the
available data may be changed. (See the table on the next page.)
9. Press the [ENTER] knob.
The data selected at step 8 appears at the location selected at step 7.
10. Press the [MENU] key several times to close the menu.
SOG
COG
DEGREE
Large column
ZOOM OUT: NEXT PAGE
Navigation data window setup menu
9. CUSTOMIZING YOUR UNIT
Press the [ZOOM IN]
or [ZOOM OUT] key to
change the page.
Small column
PLOT INTERVAL
DATE
TIME
Middle column
9-31