Changing Mark Size - Furuno GP-3500 Operator's Manual

4. MARKS & LINES
4.3

Changing Mark Size

You may choose mark size as follows:
1. Press the [MENU] key to display main menu.
2. Press the [4] key to display the MARKS/SHIP'S TRACKS SETUP menu.
3. If PAGE 2/2 appears, rotate the [ENTER] knob clockwise to select
"PREVIOUS PAGE."
4. Rotate the [ENTER] knob to choose "MARKS SIZE."
5. Press appropriate numeric key to choose size.
1. L: Large
2. L+: Large with dot at center of mark
3. S: Small
6. Press the [MENU] key several times to close the menu.
4-4
4. MARKS/SHIP'S TRACKS SETUP
NEXT PAGE
MARKS SIZE
LINES STYLE
TRACK INTERVAL 1
TRACK INTERVAL 2
SHIP'S TRACKS DISP
DISP TRACKS (HOLD) 1. ON
PLOT TRACKS (HOLD) 1. ON
TRACKS COLOR
TRACKS BY TEMP
WHITE:
BLUE:
PURPLE
LIGHT BLUE: 054.5˚F ~
GREEN:
YELLOW:
RED:
TRACKS BY DEPTH
WHITE:
BLUE:
PURPLE
GREEN:
YELLOW:
RED:
SHIP'S TRACKS 15,000
MARKS 1,000/16,000
TURN KNOB TO SELECT MENU.
SELECT THE ITEM OF EACH MENU BY TRACKBALL.
Marks/ship's tracks setup menu (page 1)
PAGE 1/2
1. L 2. L+ 3. S
1. 2. 3.
TIME (00M10s) DIST (0.10nm)
TIME (00M10s) DIST (0.10nm)
1. ON 2. OFF
2. OFF
2. OFF
1. 2. 3.
RANGE GRDNT (0.2˚F 2.0˚F)
041.0˚F BELOW
041.0˚F ~
050.0˚F ~
059.0˚F ~
063.5˚F ~
068.3˚F ABOVE
RANGE GRDNT (2 ft 20 ft 200 ft)
0032.8 ft SHALLOWER
0032.8 ft ~
0164.0 ft ~
0656.2 ft ~
0984.3 ft ~
1312.3 ft DEEPER
4.
4.