Erasing Individual Waypoints - Furuno GP-3500 Operator's Manual

5. WAYPOINT
5.3

Erasing Individual Waypoints

Individual waypoints can be erased by the cursor or through the WAYPOINTS
LIST.
Erasing waypoints by the cursor
1. Press the [CURSOR ON/OFF] key to show the cursor.
2. Operate the trackball to place the cursor on the waypoint you want to erase.
A flashing diamond mark appears over the waypoint when it is correctly selected.
3. Press the [CLEAR] key.
You are asked if you are sure to erase the waypoint.
ARE YOU SURE?
YES ... PRESS KNOB
NO ... PRESS CLEAR KEY
4. Press the [ENTER] knob.
The waypoint is erased from both the plotter screen and the WAYPOINTS LIST.
To cancel, press the [CLEAR] key.
Erasing waypoints through the WAYPOINTS LIST
1. Press the [ENTER] knob to show the main menu.
2. Press the [1] key to show the WAYPOINTS LIST.
3. Rotate the [ENTER] knob to select the waypoint you want to erase.
You can waypoints in alphabetical or distance order, or by mark shape. (See
paragraph 5.4.)
4. Press the [ERASE] key.
5. Press the [ENTER] knob.
The waypoint is erased from both the WAYPOINTS LIST and the plotter screen.
To cancel, press the [CLEAR] key.
6. Press the [MENU] key several times to close the menu.
5-10
WAYPOINT NAME XXXXXX
WIL BE DELETED.
Normal waypoint
Erasing message
THIS WAYPOINT XXXXXX
USED FOR NAVIGATION.
WILL IT BE DELETED?
YES ... PRESS KNOB
NO ... PRESS CLEAR KEY
Destination waypoint