Displaying Waypoint Data - Furuno GP-3500 Operator's Manual

5.6

Displaying Waypoint Data

You can show waypoint data on the plotter screen as follows;.
1. Press the [CURSOR ON/OFF] key to show the cursor.
2. Operate the trackball to place the cursor on the waypoint for which you want
to know its data.
The data (L/L and comment) window for the selected waypoint appears next to
the waypoint mark.
Note: If the data window does not appear, do the following steps.
a) Press the [MENU], [0], [1] key in that order.
b) Rotate the [ENTER] knob to select WAYPOINT INFO on page 2/2 of
DISPLAY SETUP menu.
c) Press the [1] key to select "1. ON, " and then press the [MENU] key several
times to close the menu.
37˚04.640'N
Cursor
135˚21.047'E
01:51 0301.01
000001
Waypoint
Waypoint data window
5. WAYPOINT
Latitude
Longitude
Comment
5-13