Remote Controller (Option) Setup - Furuno GP-3500 Operator's Manual

9.5.2

Remote controller (option) setup

The keys of the optional remote controller can be programmed as below.
1. Press the [MENU] key to show the main menu.
2. Press the [0] key to show the SYSTEM SETUP menu.
3. Press the [3] key to show the PROGRAMMABLE KEYS & REMOTE
CONTROLLER SETUP menu.
4. Rotate the [ENTER] knob to select a key No. of the remote controller, and
then press the [ENTER] knob.
For key location, refer to the figure in the menu.
The PROGRAMMABLE KEYS & REMOTE CONTROLLER SETUP menu
appears.
0-3. PROGRAMMABLE FUNCTION LIST FOR REMOTE CONTROLLER 1/2
NEXT PAGE
SAVE/MOB KEY
WAYPOINT KEY
GOTO KEY
DISPLAY MODE KEY
RANGE - ZOOM IN
RANGE - ZOOM OUT
CLEAR KEY
MARK 1
MARK 2
MARK 3
MARK 4
MARK 5
MARK 6
MARK 7
MARK 8
MARK 9
MARK 0
MARK COLOR KEY
VRM KEY
TRCK COLOR KEY
CURSOR KEY
SHIP'S CENTER KEY
PLOT INTERVAL KEY
TURN KNOB TO SELECT MENU AND PRESS KNOB TO ENTER.
ZOOM IN: PREVIOUS PAGE ZOOM OUT: NEXT PAGE
5. Rotate the [ENTER] knob to select a function, and then press the [ENTER]
knob.
6. Press the [MENU] key several times to close the menu.
7. Write the selected function name on the label supplied with the remote
controller.
8. Attach the above label on the remote controller.
Programmable functions list for remote controller
9. CUSTOMIZING YOUR UNIT
0-3. PROGRAMMABLE FUNCTION LIST FOR REMOTE CONTROLLER 2/2
PREVIOUS PAGE
TURN KNOB TO RIGHT
TURN KNOB TO LEFT
PRESS KNOB TO ENTER
Press the
TRACKBALL - RIGHT
[ZOOM IN]
TRACKBALL - LEFT
or
TRACKBALL - UP
[ZOOM OUT]
TRACKBALL -DOWN
key
TURN KNOB TO SELECT MENU AND PRESS KNOB TO ENTER.
ZOOM IN: PREVIOUS PAGE ZOOM OUT: NEXT PAGE
9-25