Selecting A Display - Furuno GP-3500 Operator's Manual

1. BASIC OPERATION
1.5

Selecting a Display

Five screen displays are available: Plotter, Pilot, Navigation, Compass and
Sounder. In addition to the full-screen display, you can divide the screen into
half-screen combination displays.
1. Press the [DISP] key.
A DISPLAY MODE screen appears. There are four pages for the DISPLAY
MODE screen.
2. Press appropriate numeric key to choose a display.
Selected display replaces display made page
Note: The DISPLAY MODE screen can store a total of nine displays. You may
program the DISPLAY MODE screen as desired. See paragraph 9.6.1.
1-10
DISPLAY MODE
2. PLOTTER
1. PLOTTER
NAV INFO 1
4. PILOT 5. PILOT
NAV INFO 1
7. COMPASS 8. COMPASS
PLOTTER PILOT
TURN KNOB TO SELECT DISPLAY MODE AND PRESS KNOB TO ENTER.
OR PRESS APPROPRIATE NUMERIC KEY TO SELECT DISPLAY MODE.
DISPLAY MODE screen
3. PLOTTER
NAV INFO 2
6. PILOT
NAV INFO 2
9. GPS STATUS