How To Set Mark Size; How To Set Line Type - Furuno GP-3700F Operator's Manual

4. MARKS, LINES
4.1.2

How to set mark size

You can select the mark size as follows:
1. Press the MENU key to open the main menu.
2. Select [4. MARK/TRACK SETTING].
3. Select [MARK SIZE] on page 1.
4. Select the mark size.
5. Press the DISP key to close the menu.
The size for currently displayed marks is changed to the size selected here.
4.1.3

How to set line type

There are four line types.
1. Press the MENU key to open the main menu.
2. Select [4. MARK/TRACK SETTING].
3. Select [LINE TYPE] on page 1.
4. Select the line type.
Solid line
5. Press the DISP key to close the menu.
The lines entered hereafter are displayed in the line type selected here.
4-2
[LARGE] [LARGE WITH DOT]
Large with a dot at the center of the mark
Dotted line Dot-dash line
[SMALL]
Two dot-dash line