Shifting The Display; Centering Own Ship's Position; Stopping/Starting Plotting And Recording Of Track - Furuno DUAL GPS GP-150-DUAL Operator's Manual

2. DISPLAY AND TRACK
Cursor turned off
Ship's position (in latitude and longitude or
LOPs), speed and course appear on the
display.
Own ship
Own ship position
mark
in latitude and longitude
34˚ 23.456´ N 135˚ 45.678´ E
TM W84
2.00NM
Figure 2-2 Data displayed
when the cursor is turned off
Shifting the cursor
1) Press the CURSOR ON/OFF key to turn
on the cursor.
2) Press the cursor pad to shift the cursor.
The cursor moves in the direction of the
arrow pressed. When the cursor reaches
the edge of the display, the display shifts
in the direction opposite of the arrow
pressed.
Centering the cursor
Press the CENTER key.
2-2
D3D 100m
* SAFE
BRG
234.0˚
COG
345.0˚
RNG
123
NM
SOG
12.3
kn
Course
Speed
2.4

Shifting the Display

The display can be shifted on the Plotter 1
and Plotter 2 displays, with the CURSOR
ON/OFF key. When own ship tracks off the
display it is automatically returned to the
screen center.
1) Press the CURSOR ON/OFF key to turn
off the cursor.
2) Press the cursor pad continuously. The
display shifts in the direction of the arrow
pressed.
2.5 Centering Own Ship's
Position
1) Press the CURSOR ON/OFF key to turn
off the cursor.
2) Press the CENTER key.
Note: When own ship's position reaches an
edge of the screen, the display moves
to set own ship's position center of the
display.
2.6 Stopping/Starting
Plotting and Recording
of Track
The GP-150-DUAL stores 2,000 points of
track and marks. When the memory becomes
full the oldest track is erased to make room
for the latest.
Procedure
Press the PLOT ON/OFF key to start/stop
recording and plotting of track.
When plotting is resumed
"Resuming track plot" appears at the center
of the display for about three seconds.