Plotter Display Overview; How To Select The Display Range; How To Shift The Cursor - Furuno GP-39 Operator's Manual

2.

PLOTTER DISPLAY OVERVIEW

2.1

How to Select the Display Range

You can change the display range on the plotter and highway displays. The available
horizontal range for the plotter display is: 0.02, 0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 40,
80, 160 and 320 nautical miles. The available horizontal range for the highway display
is: 0.2, 0.4, 0.8, 1, 2, 4, 8 and 16 nautical miles.
1. Press the MENU key on the plotter or highway display.
The following window appears.
2. Press  or  to select range you want.
3. Press the ENT/CNTR key.
2.2

How to Shift the Cursor

Use the cursorpad to shift the cursor. The cursor moves in the direction of the arrow
or diagonal.
Cursor state and position indication
The position indication, shown at bottom of the plotter display, changes according to
cursor state.
Cursor at rest
When the cursor is not shown, boat's position in longitude and latitude or TDs (de-
pending on the menu setting) appears at the bottom of the display.
(course over ground)
(speed over ground)
(Plotter display) (Highway display)
COG
20.0
350
SOG
COG line
Own ship
Own ship's position
in latitude and longitude
2-1