Data Transfer; Memory Card Operations; Selecting The Card Slot To Use - Furuno GP-7000 Operator's Manual

9.

DATA TRANSFER

This chapter provides information for saving and replaying data to and from
memory cards, and updating and downloading data.
9.1

Memory Card Operations

The memory cards store these data: waypoints, routes and track.
9.1.1

Selecting the card slot to use

There are two card slots, upper and lower. Choose the one to use for memory
cards as follows:
1. Press the [MENU] key to show the menu bar.
2. Rotate the [ENTER] knob to choose PLOTTER and then push the [ENTER]
knob.
3. Rotate the [ENTER] knob to choose MEMORY CARD and then push the
[ENTER] knob.
The MEMORY CARD list appears.
Currently
selected slot
4. Rotate the [ENTER] knob to choose CHANGE at the bottom of screen and
then push the [ENTER] knob to change the active slot.
The currently selected slot is shown at the left-hand top corner.
SLOT 1: Upper slot
SLOT 2: Lower slot
TRACK
ROUTES
WAYPOINTS
MEMORY CARD
Plotter menu
NAME
SLOT
1
FILE
1
WPTS
7
QWPTS
0
RTES
2
TRKS
0
SAVE LOAD
Memory card list
MEMORY CARD
TYPE DATE
DELETE INITIALIZE
TIME
CHANGE
9-1