How To Set An Alarm - Furuno GP-39 Operator's Manual

6.3

How to Set an Alarm

Set alarms as below:
Note: For the Anchor alarm, press the MARK/MOB key to enter the waypoint at own
ship's position, and set it as a destination referring to paragraph 5.2.1.
1. Press the MENU key twice to show the main menu.
2. Select [Alarms], and press the ENT/CNTR key.
3. Select an alarm item, and press the ENT/CNTR key.
4. Do one of the following:
(Arrival/Anchor)
1) Select [Arrival] or [Anchor], and press the ENT/CNTR key.
2) Press  and ENT/CNTR key.
3) Enter the alarm area, and press the ENT/CNTR key.
(XTE, Speed, Trip and Odometer)
1) Select [On], and press the ENT/CNTR key.
2) Press  and ENT/CNTR key.
3) Enter the value, and press the ENT/CNTR key.
(WAAS)
Select [On], and press the ENT/CNTR key.
(Time)
1) Select [On], and press the ENT/CNTR key.
2) Press  and ENT/CNTR key in order.
3) Enter the time, and press the ENT/CNTR key.
4) For 12-hour clock, press  and ENT/CNTR key.
5) Select [AM] or [PM], and press the ENT/CNTR key.
5. Press the MENU key twice to close the menu.
Note 1: To cancel an alarm, select [Off] at 1) on step 4.
Note 2: You can activate either the arrival alarm or the anchor watch alarm; they can-
not be activated together.
6. ALARMS
6-3