6-18. Setting of External Sync
6-18-1. Input of External Sync Signal
The external sync signal is input to the REF IN connector of the primary controller using the BNC cable.
Example) Primary controller
t
Supporting external sync signals
. HD three-level sync (0.6 V p-p/75 Ω/Sync negative)
. SD black-burst/Composite sync (0.286 V p-p/75 Ω/Sync negative)
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
BNC cable
External sync
signal
6-51 (E)