3-2-2. Installation in Rack
Tightening torque
Tighten the each screw with the torque below.
. B4 x 6: 1.2 ?0.1 N.m
. B4 x 10: 1.2 ?0.1 N.m
When using the torque driver with the notation of cN.m, interpret as follows.
Example: 0.8 N.m = 80 cN.m
1. Attach the rack bracket L and rack bracket R with the four screws supplied with the display controller.
Rack bracket L
B4
6
B4
6
Rack bracket R
3-4 (E)
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200