Sony ZRD-1 Installation Manual page 66

6. Align the display unit in the X and Y directions.
(1) Switch the monitor screen to the X/Y direction adjusting screen. ([X, Y] button)
(2) Insert the eccentric pins (long) into the two X adjusting holes and two Y adjusting holes. Insert
the hexagon wrench into the eccentric pins (long).
1 and 2 are for X direction adjustment, and 3 and 4 are for Y direction adjustment.
. Insert the eccentric pins (long) vertically all the way to the end.
. If you have difficulty in inserting the eccentric pins (long) into the X adjusting holes or Y
adjusting holes, slightly rotate the eccentric pins (long) to find the position into which they can
be inserted.
4
Y direction
Eccentric pin (long)
2-32 (E)
1
X direction
2
3
Y adjusting hole
Hexagon wrench
X adjusting hole
Eccentric pin (long)
Hexagon wrench
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200