Display Unit Layout Setting - Sony ZRD-1 Installation Manual

6-3-2. Display Unit Layout Setting

Here, set the following two addresses.
. Set the address of the display unit.
Determine the order of input signal.
. Set the address of picture to be displayed on the display unit.
Determine the display unit and the picture to be input in it.
About the indication
Example) C1-10-6: This indicates [Controller-1] - [Port-10] - [Unit-6].
Display
Controller 1
1. On the menu bar of the Main screen, click [Installation], click [Display Unit], and then click [Layout
Settings]. (The screen varies depending on the Display Control Software version.)
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
Port Unit
Port
Unit
1 1-1 1-2 1-3
2 2-1 2-2 2-3
3 3-1 3-2 3-3
4 4-1 4-2 4-3
5 5-1 5-2 5-3
6 6-1 6-2 6-3
7 7-1 7-2 7-3
8 8-1 8-2 8-3
9 9-1 9-2 9-3
10 10-1 10-2 10-3
11 11-1 11-2 11-3
12 12-1 12-2 12-3
1-4 1-5 1-6
2-4 2-5 2-6
3-4 3-5 3-6
4-4 4-5 4-6
5-4 5-5 5-6
6-4 6-5 6-6
7-4 7-5 7-6
8-4 8-5 8-6
9-4 9-5 9-6
C1-10-6
10-4 10-5 10-6
11-4 11-5 11-6
12-4 12-5 12-6
6-9 (E)