Displaying Black Screen In Array (Version 1.22.0 Or Later) - Sony ZRD-1 Installation Manual

6-21. Displaying Black Screen in Array (Version 1.22.0 or Later)

This function is used, for example, when you switch the video signal and do not want to display the
picture of the switching moment.
Even if the pictures supplied from the multiple display controllers are displayed, all pictures are switched
at the same time.
t
In the standby state, when you set to "ON" in [Blank] and click [Power ON], the black screen is displayed
in an array and the system can be started.
After that, when you set to "OFF" in [Blank], the picture is displayed.
1. Display the Main screen.
[OFF]: The picture supplied from the source equipment is displayed.
[ON]: The black screen is displayed in the array.
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
6-57 (E)