Installation Outline; System Configuration; Whole System - Sony ZRD-1 Installation Manual

1-1. System Configuration

1-1-1. Whole System

Contents source equipment
Matrix switcher
Video wall processor
Control (LAN)
( 1) ： DVI is supported only by ZRCT-100.
( 2) ： HDMI is supported only by ZRCT-200.
Basic configuration of system
. One display unit consists of 12 cells.
. One display controller can control the 4K2K picture.
When displaying 4K2K picture, 72 display units are required.
. The display controller has 12 ports.
One port can control 6 display units.
. To control the display units, the Display Control Software application is required. Connect the PC on
which the Display Control Software installed, to the display controller.
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
Section 1

Installation Outline

Monitor (PV)
DisplayPort,
DVI ( 1) or
HDMI ( 2)
Control (LAN)
Network switch
VPN router
PC on which the Display Control
Software is installed
Cell (LED module board)
Display unit
Display
controller
Category 7 cable
A maximum of 72 display
units can be controlled by
one display controller.
Base,
Back frame
1-1 (E)