6-7-2. Picture Quality Adjustments
The settings are reflected on all display controllers including the sub controller based on the primary
controller settings. As for the sub controller, it cannot be set individually.
1. Display the Main screen.
2. On the menu bar, click [Array], and then click [Picture Settings]. (The screen varies depending on the
Display Control Software version.)
The Picture Settings screen is displayed.
The value set in the primary controller is displayed.
Screen example (The screen varies depending on the Display Control Software version.)
Version earlier than 1.20.0
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
Version 1.20.0 or later
6-27 (E)