Connection In System - Sony ZRD-1 Installation Manual

5-2. Connection in System

. One port of the display controller can control a maximum of 6 display units.
. Install the display controller near the display unit. (Cable length: 10 m or less)
. The display controller is provided with the USB connection (SERIAL) and Ethernet connection (LAN)
interfaces.
. By using the device to extend the distance between the devices, you can place the source equipment, PC
connected to it, etc. in the location away from the array.
Display controller
1: If the cables are not supplied, prepare them separately. (Refer to "Installation" in Section 1-4-1.)
5-2 (E)
Array (display units)
Source equipment
: Category 7-equivalent cable
(supplied accessory)
: Category 7 cable
(Prepare it separately.)
: Ethernet cable (category 5)
(Prepare it separately.)
: USB cable
(Prepare it separately.)
: Video cable
(supplied accessory)
USB connection (SERIAL)
Controller PC
To be selected in units
of system
Ethernet connection (LAN)
Controller PC
Network switch
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
1
1