Omron Sysmac CS1 Operation Manual page 152

Troubleshooting Tables
Error Error Unit indicators
RUN OPN ERC
No END Lit OFF Lit
Unit Lit OFF Lit
system
error
(FALS)
Unit cycle Lit OFF Lit
time
monitor
error
CPU Errors Resulting in Customizable Counter Unit Fatal Errors
Unit indicators
Error
RUN OPN ERC
Unit OFF OFF Lit
recognition
error
Unit not OFF OFF OFF
recognized
Unit OFF OFF OFF
number
error
Unit setting OFF OFF OFF
read error
Bus error OFF OFF OFF
132
Error Error Error log Error log
message message (SIOU code, (SIOU code,
details 1, details 1,
ERH
details 2) details 2)
OFF NO END 0360 Hex
INST 00 Hex
F0 Hex
OFF SYS FAIL 0360 Hex
FALS** 00 Hex
FALS No. (1
to 99 BCD)
OFF SYS FAIL 0360 Hex
FALS9F 00 Hex
F9 Hex
Error Error log
message me age (SIOU code, (SIOU code,
details 1,
ERH
details 2)
Lit --- ---
Lit --- 0006 Hex
08 Hex
00 Hex
Lit --- ---
Lit --- ---
Lit --- ---
SR 23500 SR 23500 Error Error Meaning and corrective measures Meaning and corrective measures
to to flags flags
SR 23507 SR 23507
F0 Hex SR 23511 END(01) is not written anywhere in
program.
Write END(01) at the final address of
the program.
FALS No. SR 23511 An FALS(07) instruction has been
(1 to 99 executed in the program.
BCD)
Check the FALS number to determine
the conditions that would cause
execution, correct the cause, and
clear the error.
F9 Hex SR 23511 The cycle time has exceeded the
FALS 9F Cycle Time Monitoring Time
(DM 6618).
Check the cycle time and adjust the
Cycle Time Monitoring Time if
necessary.
SR 23500 Error Meaning and corrective measures
to to flag flags
SR 23507
--- --- The Customizable Counter Unit is not
recognized as a Special I/O Unit by
the CPU Unit.
Try to power-up again.
--- --- The actual I/O tables do not agree
with the registered I/O tables.
Recreate the I/O tables in the CPU
Unit.
--- --- The unit number is not set correctly
or the same number has been set for
another Unit.
Correct the unit numbers and try to
power-up again.
--- --- No response to a FINS command or
CPU settings could not be read.
Try to power-up again.
--- --- The access right could not be
obtained.
Try to power-up again.
Section 9-3