Table of Contents
Advertisement
All manuals and user guides at all-guides.com
How to set a schedule:
Select the edit actions of "select" or "deselect".
There are 24 blocks (one block = 1hr) on the time bar representing 24 hours
respectively. Set a schedule start time by clicking on a desired start time block on a
time bar. The selected blocks will turn blue, which means this blue timezone has be
set to th
e event schedule. The deselected blocks will turn back the original
backgroun
d color, which means the timezone has not been set to the event schedule.
Press Apply to apply the setting changes or Reset to reset without saving the
change.
5.8 SYSTEM
Date/Time
, Daylight Saving, SD card and Maintenance settings can be accessed
on this page
.
The "System" page has 3 tabs: [Dat
[Maintenance] tab.
5.8.1 Date/Time
M
achine Name Setting
Machine Name: Enter the name f
displayed in the status display area, and used to label any recoding and/or
e/Time] tab, [Daylight Saving] tab and
or the camera. The entered name will be
35
EQN2200/2201
en
Advertisement
Table of Contents
