7.1.1.4. RTSP Settings
Enable: Check the box to enable RTSP function.
Authentication: Check the box if the RTSP server requires authentication (user / password).
Port: Enter RTSP port numbers. The default port is 554.
After complete the settings, click Save to apply the changes.
7.1.2. Date / Time
You can set up the system's time on this page.
7.1.2.1. Date/Time Settings
There are three ways to configure the camera date and time: synchronize with NTP, synchronize
with PC or manually input date and time.
Note: Before start operating the IP camera, please make sure the camera date and time are
correct.
Date: Display the camera date / time. If you select to Manually Input Date and Time, you can
manually enter the date/ time in these fields.
NTP Settings:
44
EAN7360 / EHN7360 / EZN7360