Installation
4.2 Electrical Installation
4.2
Electrical Installation
4.2.1
Overview of the interfaces
Intefaces of the converter
①
②
③
④
⑤
⑥
⑦
32
Digital inputs 0 ... 5 with status LED
Fieldbus IN and OUT (PROFINET or PROFIBUS)
24 V DC supply IN and OUT
Optical interface for operator panel IOP hand‐
held
Converter status LED
USB PC connection, address and bus termina‐
tion switch for PROFIBUS
Digital outputs 0 and 1 with status LED
⑧
HTL Encoder connection
⑨
Analog inputs 0 and 1
⑩
Slot for a memory card at rear of the Control
Unit
⑪
PROFINET status LED
⑫
PE grounding terminal
⑬
Mains supply connection
⑭
Motor, brake and temperature sensor connec‐
tions
Converter with the control units CU240D-2
Operating Instructions, 10/2020, FW V4.7 SP13, A5E34262100B AH