Siemens SINAMICS G120D Operating Instructions Manual page 297

Parameter
Table 9-11
Parameter
r0945[0 ... 63]
r0948[0 ... 63]
r0949[0...63]
p0952
r2109[0 ... 63]
r2130[0 ... 63]
r2131
r2133[0 ... 63]
r2136[0 ... 63]
Extended settings for faults
Parameter
p2100[0...19]
p2101[0...19]
p2118[0...19]
p2119[0 ... 19]
p2126[0 ... 19]
p2127[0 ... 19]
Further information is provided in the parameter list.
Converter with the control units CU240D-2
Operating Instructions, 10/2020, FW V4.7 SP13, A5E34262100B AH
Parameters of the fault buffer and the fault history
Description
Fault code
Fault time received in milliseconds
Fault value
Fault cases counter
Fault time removed in milliseconds
Fault time received in days
CO: Actual fault code
Fault value for float values
Fault time removed in days
Description
Changing the fault reaction, fault number
Changing the fault reaction, reaction
Change message type, message number
Change message type, type
Changing the acknowledge mode, fault number
Changing the acknowledge mode
Alarms, faults and system messages
9.5 Faults, alarm buffer and alarm history
Factory setting
-
- ms
-
0
- ms
-
-
-
-
Factory setting
0
0
0
1
0
1
295