Quick Commissioning With A Pc; Creating A Project; Transfer Converters Connected Via Usb Into The Project - Siemens SINAMICS G120D Operating Instructions Manual

Commissioning

5.5 Quick commissioning with a PC.

5.5 Quick commissioning with a PC.
The screen forms that are shown in this manual show generally valid examples. The number of
setting options available in screen forms depends on the particular converter type.
5.5.1

Creating a project

Creating a new project
Procedure
1. Start the Startdrive commissioning software.
2. In the menu, select "Project" → "New...".
3. Specify a name of your choice for the project.
You have created a new project.
❒
5.5.2

Transfer converters connected via USB into the project

Integrating the converter into the project
Procedure
1. Switch on the converter power supply.
2. First insert a USB cable into your PC and then into the converter.
3. The PC operating system installs the USB driver when you are connecting the converter and
PC together for the first time.
4. Press the "Accessible nodes" button.
86
Converter with the control units CU240D-2
Operating Instructions, 10/2020, FW V4.7 SP13, A5E34262100B AH