Checking The Assignment Of The Digital Inputs - Siemens SINAMICS G120D Operating Instructions Manual

Advanced commissioning
8.12 Safe Torque Off (STO) safety function
7. Wait until all LEDs on the converter go dark (no voltage condition).
8. Switch on the converter power supply again.
Your settings are now active.
❒
Parameter
Parameter
p0010
p0971
p9700
p9701
8.12.3.10

Checking the assignment of the digital inputs

Overview
The simultaneous connection of digital inputs with a safety function and a "standard" function
may lead to the drive behaving in unexpected ways.
If you control the safety functions in the converter via failsafe digital inputs, then you must check
as to whether the failsafe digital inputs are in some instances interconnected with a "standard"
function.
Function description
Procedure
190
Description
Drive commissioning parameter filter
Save parameters
SI copy function
Acknowledge SI data change
Operating Instructions, 10/2020, FW V4.7 SP13, A5E34262100B AH
Factory setting
1
0
0000 hex
0000 hex
Converter with the control units CU240D-2