Repair Procedures; Introduction - Terex Genie SX -180 Service And Repair Manual

December 2018
Section 3 Repair Pr oc edures
Observe and Obey:
R
Repair procedures shall be completed by a
person trained and qualified on the repair of this
machine.
R
Immediately tag and remove from service a
damaged or malfunctioning machine.
R
Repair any machine damage or malfunction
before operating the machine.
Before Repairs Start:
R
Read, understand and obey the safety rules
and operating instructions in the appropriate
operator's manual on your machine.
R
Be sure that all necessary tools and parts are
available and ready for use.
R
Use only Genie approved replacement parts.
R
Read each procedure completely and adhere
to the instructions. Attempting shortcuts may
produce hazardous conditions.
Part No. 1268497

Repair Procedures

Machine Configuration:
R
Unless otherwise specified, perform each
repair procedure with the machine in the
following configuration:
· Machine parked on a firm, level surface
· Key switch in the off position with the key
removed
· The red Emergency Stop button in the off
position at both the ground and platform
controls
· Wheels chocked
· All external AC power supply disconnected
from the machine
· Boom in the stowed position
· Turntable secured with the turntable rotation
lock
SX-180
Service and Repair Manual
17