Siemens SIMOTION ADI4 Equipment Manual page 88

Commissioning
5.4 Incremental encoder (TTL)
Settings: SIMOTION/TCPU
After you have created a new encoder in the project navigator of SIMOTION SCOUT under
"EXTERNAL ENCODERS" and have assigned the technology object parameters in the displayed
dialog boxes, e.g. "Axis Type" and "Units", the encoder data must be entered in the "Encoder
Assignment" and "Encoder - Data" dialog boxes:
1. Settings in the "Encoder Assignment" dialog box
Figure 5-9
2. Settings in the "Encoder - Data" dialog box
88
Encoder assignment settings
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
Equipment Manual, 07/2017, A5E33446849B