Siemens SIMOTION ADI4 Equipment Manual page 83

Settings in STEP 7, HW Config
Figure 5-5
STEP 7 settings, HW Config
Encoder type
Resolution
MsgLength
Encoding
Reserved bits for fine resolution
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
Equipment Manual, 07/2017, A5E33446849B
Encoder settings in STEP 7, HW Config
5.3 Absolute encoder (SSI), multiturn
Corresponding encoder parameters
Encoder parameters: "Encoder type"
Encoder parameters: "Increments/revolution (resolution)"
Encoder parameters: "User data length"
Encoder parameters: "Actual value protocol format"
Note: The value is permanently set by ADI4.
Commissioning
83