Siemens SIMOTION ADI4 Equipment Manual page 27

Prefabricated cables
The following prefabricated cables can be used, depending on the encoder type:
• Incremental encoder (TTL) with RS 422 and operating voltage 5 V or 24 V
Article number: 6FX8 002‑2CD01‑1☐☐0 (5 V)
Article number: 6FX5 002-2CD24-1☐☐0 (24 V)
Information on the cable lengths can be found in the "Maximum cable lengths" section.
• Absolute encoder with SSI
Article number: 6FX8 002‑2CC11‑☐☐☐0
Information on the cable lengths can be found in the "Maximum cable lengths" section.
• 1FT5 motor with integrated ROD320 encoder
Article number: 6FX8 002‑2CE02‑1☐☐0
Cable length: Can be found in the "Maximum cable lengths" section.
Information regarding the length codes is provided in:
References: /Z/Catalog NC Z
Maximum cable lengths
The maximum cable length depends on the following two parameters:
• Encoder supply voltage
Table 3-7
Supply voltage: 5 V DC
Supply voltage: 24 VDC
• Transmission frequency
Table 3-8
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
Equipment Manual, 07/2017, A5E33446849B
Encoder supply voltage
Tolerance
4.75 V to 5.25 V
4.75 V to 5.25 V
Tolerance
20.4 V to 28.8 V
11 V to 30 V
Transmission frequency
Encoder type
Incremental (TTL)
Absolute (SSI)
Current consumption
≤ 300 mA
≤ 220 mA
Current consumption
≤ 300 mA
≤ 300 mA
Power supply
5 V
24 V
24 V
Hardware description
3.2 Interface description
Max. cable length
25 m
30 m
Max. cable length
100 m
300 m
Frequency
cable length
1 MHz
500 kHz
500 kHz
750 kbit/s
187.5 Kbit/s
Max.
10 m
30 m
150 m
10 m
250 m
27