Table of Contents
Advertisement
Preface
My Documentation Manager
Click the following link for information on how to compile documentation individually on the
basis of Siemens content and how to adapt it for the purpose of your own machine
documentation:
https://support.industry.siemens.com/My/ww/en/documentation
Training
Click the following link for information on SITRAIN - Siemens training courses for automation
products, systems and solutions:
http://www.siemens.com/sitrain
FAQs
Frequently Asked Questions can be found in SIMOTION Utilities & Applications, which are
included in the scope of delivery of SIMOTION SCOUT, and in the Service&Support pages in
Product Support:
http://support.automation.siemens.com
Technical support
Country-specific telephone numbers for technical support are provided on the Internet
under Contact:
http://www.siemens.com/automation/service&support
Scope
ADI4 is supported by the following Siemens products:
• SCOUT Engineering System, Version 3.1.1 or later
• SIMOTION Runtime, Version 3.1.1 or later
• SINAMICS V2.1 or later
Organization of information
The information about ADI4 in this manual is organized as follows:
• General
This chapter describes the properties and essential features as well as the higher-level
boundary conditions of the ADI4.
• Hardware description
This chapter describes the interfaces of the ADI4, the control cabinet installation, and the
power supply of the module.
• Parameter assignment
This chapter describes the assignment of ADI4 parameters for PROFIBUS DP and for functions.
4
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
Equipment Manual, 07/2017, A5E33446849B
Advertisement
Table of Contents
