Dp Cycle Tdp - Siemens SIMOTION ADI4 Equipment Manual

Figure 4-10
4.6.5

DP cycle TDP

Procedure
In the "Factor" entry field of the "DP cycle (ms)", enter a value such that the resulting DP cycle is
equal to the equidistant DP cycle.
Dialog: Start
Dialog: DP slave properties
Tab: Isochronous operation
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
Equipment Manual, 07/2017, A5E33446849B
"Options" dialog box
Entry field: Factor = 16 (example value)
4.6 Parameter assignment of the DP communication
Parameter assignment
65