Siemens SIMOTION ADI4 Equipment Manual page 67

Procedure
In the entry field for the factor of the "Master application cycle [ms], enter a value such that the
required time ratio is achieved.
Dialog: Continuation
Dialog: DP slave properties
Tab: Isochronous operation
Figure 4-12
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
Equipment Manual, 07/2017, A5E33446849B
Entry field: Factor = 1
"DP Slave Properties" dialog box
4.6 Parameter assignment of the DP communication
Parameter assignment
67