Network Setup Menu - Epson EPL-6200 Network Manual

Network Guide
8. Select PANEL, then press the Enter button. Press the Left button to return to the

NETWORK SETUP menu.

9. Press the Down button to select IP, SM, or GW, then press the Right button.
10. Press the Up or Down button on the IP ADDRESS screen until the desired value
appears. Then press the Right button.
11. Press the Up or Down button on the SUBNET MASK screen until the desired value
appears. Then press the Enter button.
12. Press the Up or Down button on the DEFAULT GATEWAY screen until the desired value
appears. Then press the Enter button to set the values.
13. Press the Left button twice to exit the control panel menus.
14. Turn off your printer and then turn it back on. Be sure to wait until the initialization is
complete.
Print a network status sheet to confirm the new IP address.
Note:
❏ You must first set the IP address before using EpsonNet Config with Web Browser.
❏ See the User's Guide for more information about settings on the printer's control panel.
Network Setup Menu
These items are used to make network settings on the printer's control panel.
Item
NETWORK SETUP
IP ADDRESS
SETTING*
IP*
SM*
GW*
AppleTalk*
MS Network*
Bonjour*
INIT NETWORK
SETTING*
* Available only when Enable is selected for NETWORK SETUP.
Settings (default in bold)
Disable, Enable
Auto, Panel, PING
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
On, Off
On, Off
On, Off
EXECUTE
Tips for Administrator
172