System Requirements; Installing Epsonnet Config - Epson EPL-6200 Network Manual

Network Guide

System Requirements

The following table lists the system requirements of EpsonNet Config.
Operating systems
Hard disk drive space

Installing EpsonNet Config

Follow the steps below to install EpsonNet Config on your computer to configure the
network interface.
Note:
If you add or delete protocols or services from your operating system after installing EpsonNet
Config, EpsonNet Config may not work correctly. If this happens, uninstall EpsonNet Config and
then install it again.
1. Insert the Network Utilities CD-ROM in the CD-ROM drive.
2. The Software Installation screen opens automatically.
If the Software Installation screen does not appear, double-click EPSETUP.EXE on the
CD-ROM.
3. Make sure that all applications are closed, and then click the icon located next to
EpsonNet Config.
Windows Me
Windows 98/98 Second Edition
Windows 95 OSR2 or higher
Windows XP Professional/Professional x64 Edition/Home Edition
Windows Server 2003/Server 2003 x64 Edition
Windows 2000 Server/Professional
Windows NT 4.0 Server/Workstation with Service Pack 5.0 or higher
10 MB
100
Network Software