The Printer Status Menu; The Network Setup Menu - Epson SC-F9200 series User Manual

SC-F9200 Series User's Guide
Item
All Nozzles
Head1/Head2
Head1
Head2
Selected Nozzles
Head Maintenance
Waste Ink Counter

The Printer Status Menu

These items track printer use and settings.
Item
Print Status Sheet
Firmware Version

The Network Setup Menu

is the default setting.
Item
IP Address Setting
Auto
Panel
Print Status Sheet
Restore Settings
Using the Control Panel Menu
Parameter Explanation
Execute (Light)/ Note the numbers of patterns that contain faint or missing colors and
Execute (Medium)/ clean all or selected nozzles. All Nozzles performs head cleaning for all
Execute (Heavy) nozzles. Choose Selected Nozzles to clean only the nozzles in selected
arrays.
The level of cleaning can be selected from Execute (Light), Execute
(Medium), and Execute (Heavy). Select Execute (Light) first. If the
problem persists after you have used Execute (Light), choose Execute
(Medium). If the problem persists after you have used Execute (Medium),
select Execute (Heavy).
Move Head Position the print head for maintenance. Perform such maintenance as
cleaning the wiper, caps, and the area around print head only after using
this option to position the head for cleaning. Moving the print head
manually could cause malfunction.
"Cleaning" on page 59
U
- If you replace the Waste Ink Bottle before being prompted by a message
indicating the replacement interval of the Waste Ink Bottle in the control
panel, run the Waste Ink Counter option after replacement.
Parameter
Print
XXXXXXX,X_XX,XXXX
Parameter
-
IP: XXX.XXX.XXX.XXX
SM: XXX.XXX.XXX.XXX
DG: XXX.XXX.XXX.XXX
Print
Yes
No
Explanation
Print a status sheet showing current printer settings. Use this
option to view a variety of information about the printer on a
single sheet.
View the printer Firmware Version.
Explanation
Select whether IP addresses are obtained automatically (Auto)
using DHCP or manually (Panel). If Panel is selected, enter an IP
address, subnet mask, and default gateway address. Contact your
system administrator for detailed information.
Use Network Setup to print the current network status. Use this
information for a complete overview of network settings.
Select Yes to restore all items in the Network Setup menu to their
default settings.
99