Epson EPL-6200 Network Manual page 106

Network Guide
❏ Run EpsonNet Config for Windows or Macintosh. Select the printer you want to
configure from the list and then click Launch Browser.
❏ Open your browser, and then type in the IP address of the network interface directly.
Do not run EpsonNet Config for Windows or Macintosh.
http://IP address of network interface/
Example: http://192.168.100.201/
Note:
To check the IP address of the network interface, use EpsonNet Config. See "About EpsonNet
Config" on page 99 for Windows users, or see "About EpsonNet Config" on page 102 for
Macintosh users for details.
Note for users of printers supporting NetWare queue-based printing:
❏ From any NetWare client, log in to the target NetWare server or NDS context with
supervisor privileges.
❏ You cannot create a print server, print queue, or printer with Web-based EpsonNet Config.
You must create these objects before using Web-based EpsonNet Config.
3. Click TCP/IP under Network on the Configuration menu to display the TCP/IP setting
screen.
Note:
If you want to configure a protocol other than TCP/IP, see "Configuration - Network Screens" on
page 122.
4. Select a method for acquiring the IP address. When you select Auto, DHCP becomes
available and assigns an IP address automatically. If you want to set the IP address
manually, select Manual.
Note:
❏ The network administrator must check any changes made to the IP address settings.
❏ When Auto is selected, DHCP becomes available. To use the DHCP server, make sure it
is installed on your computer and correctly configured. See your operating system's online
help for detailed instructions.
❏ If Set Using Automatic Private IP Addressing (APIPA) is enabled, a private IP address
is automatically assigned to the network interface even when there are no DHCP servers on
your system or your network.
❏ If the Dynamic DNS function is not supported, we recommend that you select Manual and
then enter an IP address. This is because if you select Auto, the IP address of the network
interface changes every time you turn on the printer so that you need to change the printer
port setting accordingly.
106
Network Software