Epson EPL-6200 Network Manual page 140

Network Guide
Items
Port Type
The port Information
Finish button
Back button
Cancel button
The printer is now ready for peer-to-peer printing. To configure the printer port, see
"Configuring the Printer Port" on page 142.
Explanations
The following items are listed in the pull-down menu, and you can
select the port type you need.
IP Address(Auto): Configure the port automatically. If the IP
address of the printer is acquired automatically and the
computer and the printer are in the same segment, you can
select this port type.
IP Address(Manual): Use the printer's IP Address for the port
name.
HostName (DNS): Use the printer's host name registered in the
DNS server for the port name.
MS Network: Use the NetBIOS name registered in the printer for
the port name.
The following items are displayed:
- Port Name (If the port type is changed, the port name and the
host name or IP address are also changed.)
- Printer Model
- Host Name or IP Address
- Protocol
Register the port information to the system and close the Add
EpsonNet Print Port Wizard.
Go back to the printer list window.
Close the Add EpsonNet Print Port Wizard.
140
Network Software