Epson EPL-6200 Network Manual page 118

Network Guide
End
Join
Pen (0 to 6)
Set button
Refresh button
ESCP2 and FX Emulation
Items
Emulation
Font
Pitch
Condensed
T. Margin
Text
CG Table
Country
Auto CR
Auto LF
Bit Image
Zero Char
Set button
Refresh button
Select the way in which lines end.
Select the way in which lines are joined.
Select the thickness of the seven "pens" used to make the
printout.
Saves any changes.
Clears any changes and reloads the previous settings.
Explanations
Select ESCP2 or FX.
Select a font which is used for printing.
Select a character pitch.
Use this option to change the character spacing.
Use this option to specify the distance from the top of the
sheet to the baseline of the first printable line.
Use this option to set the page length in lines.
Use the character generator table option to select the
graphics character table, or the italics table.
Use this option to select one of the international symbol
sets.
Use the automatic carriage return option to perform a
carriage-return line-feed (CR-LF) operation whenever the
print position exceeds the right margin.
When you set AutoLF to Off, the printer does not send an
automatic line feed (LF) command with each carriage
return (CR). When on, the printer adds a line feed to each
carriage return it receives.
With Bit Image set to Dark or Light, your printer can
correctly emulate the graphics densities set with the
printer command. When you select Dark, the bit image
density is high. When you select Light, the bit image
density is low.
Select whether the printer prints a slashed zero or an
unslashed zero.
Saves any changes.
Clears any changes and reloads the previous settings.
118
Network Software